Crista
Elongated Two Piece Toilet - 17" Bowl Height
17¼"(W) x 29⅛"(D) x 31"(H)
440mm(W) x 740mm(D) x 790mm(H)
· Low consumption toilet
· 6Lpf / 1.6Gpf
· Elongated bowl
· Vitreous china
· 17" Bowl height
· Chrome tank lever
· 12" (305mm) Rough-in
· 2" Fully glazed ball pass trapway
· Siphon jet flush action
· Water surface (240mm x 160mm) 9½" x 6¼"
· Toilet seat not included
Available Configurations
Toilet Tank
| Model # | Flow Capacity | Water Saving | Tank Style | Material | Color | Rough In |
|---|---|---|---|---|---|---|
| 4721BFTU | 6L/1.6G | NO | Unlined | Vitreous China | Soft White | 12" Rough In |
| 4721BFTU-055 | 6L/1.6G | NO | Unlined | Vitreous China | Bone | 12" Rough In |
| 4721BFTU-066 | 6L/1.6G | NO | Unlined | Vitreous China | Biscuit | 12" Rough In |
| 4721BFT | 6L/1.6G | NO | Lined | Vitreous China | Soft White | 12" Rough In |
| 4721BFT-055 | 6L/1.6G | NO | Lined | Vitreous China | Bone | 12" Rough In |
| 4721BFT-066 | 6L/1.6G | NO | Lined | Vitreous China | Biscuit | 12" Rough In |
| 4721BFTU-RH | 6L/1.6G | NO | Unlined | Vitreous China | Soft White | 12" Rough In |
| 4721BFTU-RH-055 | 6L/1.6G | NO | Unlined | Vitreous China | Bone | 12" Rough In |
| 4721BFTU-RH-066 | 6L/1.6G | NO | Unlined | Vitreous China | Biscuit | 12" Rough In |
Toilet Bowl
| Model # | Flow Capacity | Water Saving | Bowl Height | Mount | Flush System | Material | Shape | Color |
|---|---|---|---|---|---|---|---|---|
| 4722BIT | 6L/1.6G | NO | 17" Height Bowl | Floor Mount | Siphon Jet | Vitreous China | Elongated | Soft White |
| 4722BIT-055 | 6L/1.6G | NO | 17" Height Bowl | Floor Mount | Siphon Jet | Vitreous China | Elongated | Bone |
| 4722BIT-066 | 6L/1.6G | NO | 17" Height Bowl | Floor Mount | Siphon Jet | Vitreous China | Elongated | Biscuit |
Product Downloads
Additional Notes
This toilet is designed to rough-in at a minimum dimension of 305mm (12") from finished wall to C/L of outlet. Supply line not included with fixture and must be ordered separately.
Important: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Products are designed to comply ADA/ANSI A117.1 Standard. It shall be the responsibility of the installer to comply with the local disability codes and standards prior to installing the product.